铬渣秸秆共热解产物铬稳定性研究

生物质铬渣共热解工艺是新型的铬渣处理工艺,该工艺能有效地将铬渣中的Cr(Ⅵ)还原为Cr(Ⅲ).而由于共热解产物总铬含量较高,因此考察了铬渣与秸秆共热解过程中铬稳定性.通过考察共热解产物成分及形态分析、pH影响实验、淋洗实验及长期稳定性实验,对共热解铬渣的铬环境安全性进行评估.结果表明:(1)共热解温度对铬渣形态有较大影响,可交换态及碳酸盐结合态铬含量随共热解温度升高而逐渐降低,800℃时候可交换态铬降至＜0.1％(质量分数,下同),碳酸盐结合态铬为1.2％;共热解后最稳定的残渣态铬含量随共热解温度升高而逐渐升高.(2)当pH＞7时,两种共热解产物总铬溶出量极低,基本都小于6mg/kg;当pH≤7时,总铬的溶出量显著增加,最高超过500 mg/kg.但由于解毒铬渣的酸中和能力极强,因此铬释放风险较低.(3)共热解产物的总铬累积溶出量极低,根据拟合结果计算出其100年填埋时间的总铬溶出量不超过1.3 mg/kg.长期稳定性实验表明,自然堆置过程中共热解产物的Cr(Ⅵ)含量逐渐降低.     

Characterization of distribution of pesticide residues in crop units

The characteristic features of distribution of pesticide residues in crop units and single sample increments were studied based on more than 19,000 residue concentrations measured in root vegetables, leafy vegetables, small-, medium- and large-size fruits representing 20 different crops and 46 pesticides. Log-normal, gamma and Weibull distributions were found to provide the best fit for the relative frequency distributions of individual residue data sets. The overall best fit was provided by lognormal distribution. The relative standard deviation of residues (CV) in various crops ranged from 15–170%. The 100–120 residue values being in one data set was too small to identify potential effects of various factors such as the chemical and physical properties of pesticides and the nature of crops. Therefore, the average of CV values, obtained from individual data sets, were calculated and considered to be the best estimate for the likely variability of unit crop residues for treated field (CV = 0.8) and market samples (CV = 1.1), respectively. The larger variation of residues in market samples was attributed to the potential mixing of lots and varying proportion of non-detects. The expectable average variability of residues in composited samples can be calculated from the typical values taking into account the sample size.     

2种新分离微藻的生长、氮磷去除和营养特性的比较研究

为了解2种新分离微藻的净化和资源化潜力，研究比较了其生长、氮磷去除和营养特性。结果表明，栅藻和月牙藻的最大生物量（干重）分别为0．78g／L和0．53g／L；最大生物量（干重）增长速率分别为0．05g／（L·d）和0．03g／（L·d）。培养至第23天，栅藻和月牙藻对TN的去除率分别为85．1％和72．5％；对TP的去除率为82．6％和79．7％，但栅藻较月牙藻更易释放较多的No2--N进入藻液。稳定期时，栅藻、月牙藻的粗蛋白质含量和粗蛋白产量（干重）分别为31．8％、19．2％和0．24g／L、0．09g／L；粗脂含量和粗脂产量（干重）分别为7．81％、9．26％和0．06g／L、0．05g／L。综上，与月牙藻相比，栅藻具有明显的生长、氮磷去除和营养优势，在进行水产养殖废水的净化和资源化利用上可作为优选藻种。     

Effect of tracer dyes on initial deposits and persistence of bacillus thuringiensis subsp. kurstaki toxin after application of two commercial formulations onto spruce trees

Abstract

The effect of two tracer dyes [Erio Acid Red (EAR) and Acid Black 48 (AB‐48)] on initial deposits and persistence of Bacillus thuringiensis subsp. kurstaki (Btk) toxin (delta‐endotoxin) was studied after spraying two commercial formulations, Foray® 48B and Foray® 76B, over potted white spruce [Picea glauca (Moench) Voss] seedlings, at a dosage rate of 30 billion international units (BIU) per ha. Spray was applied using a spinning disc atomizer calibrated to deliver droplet sizes similar to those utilized in ultra‐low‐volume (ULV) treatments in operational insect control programs. The sprayed seedlings were left outdoors at the Sault Ste. Marie laboratory for 18 days under natural conditions of sunlight, wind and rainfall. Initial deposits and persistence of delta‐endotoxin protein in spruce foliage were determined by immunoassay [enzyme linked immunosorbent assay (ELISA)] quantification of the delta‐endotoxin. The total protein (inactive plus active) and delta‐endotoxin (active protein) concentrations in the two formulations were determined by a gravimetric procedure and by ELISA respectively.

The initial deposit levels of the toxin on foliage were not markedly affected by the addition of either of the two tracer dyes, and showed only a narrow range of 1521 to 1625 ng/g foliage (fresh weight) for Foray 48B, and 1789 to 2056 ng/g for Foray 76B. However, the persistence of the toxin was significantly influenced by the presence of the dyes. The toxin persisted in foliage only for 7 d post‐spray When the EAR dye was added to Foray 48B, compared to 10 d when no dye was added. The average half‐life (DT₅₀) of disappearance was 17.4 h for Foray 48B with EAR, and 20.9 h when no dye was present. In contrast, the situation was reversed in Foray 76B, since the duration of persistence was 10 d when EAR was added to Foray 76B, compared to 7 d when no dye was added. The average DT₅₀ was 27.9 h for Foray 76B with EAR, and 22.2 h without the dye. Persistence was the longest (14 d) when the AB‐48 dye was added to Foray 76B, and the DT₅₀ was 44.9 h.     

盲样考核浓度预判及稀释方法——以原子荧光法测定水中砷为例

以原子荧光法测定水中砷为例,探讨了实验室盲样考核浓度预判及稀释方法.分析了3个砷盲样考核实例,归纳了“直接稀释法”“系列稀释法”“最大稀释法”3种方法,分别适用于盲样浓度范围窄、适中、宽3种情况,检测人员可根据考核机构给定的浓度范围合理选用.     

工业园区环境风险源识别与分级研究

以多年来中国各行业突发环境事故统计数据为基础,选取了对于企业突发环境事件有重大影响的7个因子以及17个指标,采用指标因子分析法对其进行定量,应用层次分析法确定各因子的权重,从而确定企业环境风险水平值。基于"危险物质水平—企业环境风险水平—周边环境受体状况"体系,构建了环境风险源分级矩阵,形成了包括"环境风险源初筛","环境风险源分级"的两步工业园区环境风险源识别与分级方法。该方法提出的工业园区环境风险源识别与分级体系具有科学性和可行性,能为工业园区环境风险管理提供依据。     

清河流域水质目标管理技术应用示范

针对清河流域三级水生态功能分区功能定位和水质保护目标,按照"分类、分区、分级、分期"理念,应用流域水质目标管理技术方法,研究清河流域控制单元污染负荷核定、水环境容量计算与分配、污染负荷削减、污染物总量控制等关键技术应用示范,完善流域水质目标管理技术,为清河流域水环境管理提供科技支撑。     

热水解超声组合预处理对污泥厌氧消化产气潜力的影响研究

针对城市污泥厌氧消化由于融胞困难所导致的消解速率低、产气量低等问题,采用热水解与超声组合的方法对污泥进行预处理,考察经预处理后污泥融胞效率的变化及对厌氧消化产气潜力的影响.结果显示,热水解与超声波组合工艺对污泥的破胞作用明显,在30 min热水解与0.53 W/mL超声声能密度组合工艺反应60 min条件下,相对于处理前污泥,预处理后污泥溶解性COD(SCOD)溶出率可提高41.6％,蛋白质增加值达282.7 mg/L,污泥厌氧消化的产气潜力显著增加；30 min热水解分别与0.53、0.33 W/mL超声声能密度组合工艺对污泥破胞效率的差异不大；随着超声时间的延长,在组合预处理工艺前20 min内SCOD的溶出速率较慢,20260 min时溶出速率逐渐提高.试验结果可为城市污泥厌氧消化预处理工艺的选择提供一定的理论依据.     

焦化苯初馏份蒸馏釜发生爆炸的原因探讨

通过对某企业的一起典型爆炸事故案例进行分析,找出其产生的原因,提出了预防措施。     

自然通风排热量的近似计算法

采用“假设密闭绝热空间法”,计算工业厂房的自然通风排热量。实践证明,此方法是可行的。